Aflati pretul pentru JUMO 703590/281-8800-350000-23-00/
Aflati pretul pentru JUMO The multi-channel process and program controller for panel mounting in front format 144 mm x 130 mm requires a panel cut-out of 92 mm x 92 mm and an installation depth of 170 mm. It is equipped with 2 universal inputs, 6 binary inputs, 2 relay outputs (make contact), 1 analog output, 1 RS422 / 485 interface and requires a power supply in the range AC 110 to 240 V + 10 / -15%, 48 to 63 Hz another 4 free slots for option boards are available. The controller can be used as a continuous controller, two, three-point, three-point step, positioner or cascade controller. Differential or ratio control is also possible. It is a process and program controller with two controller and four program channels. 50 programs with a maximum of four program channels can be programmed. The program channels run synchronously and can consist of a maximum of 100 sections. A total of 1000 sections can be programmed. Furthermore, 16 control contacts can be programmed, which can be assigned to the sections of the program channels and are also carried synchronously. A program can be started manually by pressing a button (on the device or an external button) or by programming start conditions. The time can be determined either by specifying a lead time or by programming the date and time. A 5 "color screen with 27 colors serves as the display. The linearizations of the usual sensors are saved. The device can be integrated into a data network via the RS422 / 485 serial interface. The electrical connection is made on the back via screw terminals. The controller has cULus approval.
The multi-channel process and program controller for panel mounting in front format 144 mm x 130 mm requires a panel cut-out of 92 mm x 92 mm and an installation depth of 170 mm. It is equipped with 2 universal inputs, 6 binary inputs, 2 relay outputs (make contact), 1 analog output, 1 RS422 / 485 interface and requires a power supply in the range AC 110 to 240 V + 10 / -15%, 48 to 63 Hz another 4 free slots for option boards are available. The controller can be used as a continuous controller, two, three-point, three-point step, positioner or cascade controller. Differential or ratio control is also possible. It is a process and program controller with two controller and four program channels. 50 programs with a maximum of four program channels can be programmed. The program channels run synchronously and can consist of a maximum of 100 sections. A total of 1000 sections can be programmed. Furthermore, 16 control contacts can be programmed, which can be assigned to the sections of the program channels and are also carried synchronously. A program can be started manually by pressing a button (on the device or an external button) or by programming start conditions. The time can be determined either by specifying a lead time or by programming the date and time. A 5 "color screen with 27 colors serves as the display. The linearizations of the usual sensors are saved. The device can be integrated into a data network via the RS422 / 485 serial interface. The electrical connection is made on the back via screw terminals. The controller has cULus approval.
