Aflati pretul pentru JUMO 202924/20-0001-1003-613-83-31-31

Aflati pretul pentru JUMO This conductive conductivity sensor has a cell constant of K = 0.01 (for measuring ranges 0.05 to 10 uS / cm or 0.1 to 20 MOhm / cm) as well as a Pt100 measuring insert in a two-wire circuit. It is installed using the stainless steel (1.4435) process connection clamp DN 25. An M12 connector is available for the electrical connection. The material of the electrode is stainless steel (1.4435). The installation length is 115 mm. The operating temperature is 0 to +135 ° C and the maximum pressure load is 16 bar at 25 ° C and 1 bar at 135 ° C. This version is a so-called pharmaceutical version with an acceptance test certificate according to EN 10204 3.1 for material and roughness, roughness of the parts in contact with the medium less than 0.8 my, with ASTM certificate and sealed in foil.

JUMO | 00456810 | Conductive 2-electrode conductivity sensor, 0.05 ... 10 uS / cm, 0.1 ... 20 MOhm / cm | 202924/20-0001-1003-613-83-31-31

Producător: JUMO
Articol Nr.: 202924/20-0001-1003-613-83-31-31
Cod Produs: 00456810
Disponibilitate: 3-4 sapt.
Unitate: buc.

Nume *:

Telefon *:

E-mail*:
Localitate *:

Subiect:

Mesaj*:

Atasament:

Confidențialitate * Politica de confidențialitate

Descriere

JUMO 00456810

This conductive conductivity sensor has a cell constant of K = 0.01 (for measuring ranges 0.05 to 10 uS / cm or 0.1 to 20 MOhm / cm) as well as a Pt100 measuring insert in a two-wire circuit. It is installed using the stainless steel (1.4435) process connection clamp DN 25. An M12 connector is available for the electrical connection. The material of the electrode is stainless steel (1.4435). The installation length is 115 mm. The operating temperature is 0 to +135 ° C and the maximum pressure load is 16 bar at 25 ° C and 1 bar at 135 ° C. This version is a so-called pharmaceutical version with an acceptance test certificate according to EN 10204 3.1 for material and roughness, roughness of the parts in contact with the medium less than 0.8 my, with ASTM certificate and sealed in foil.

Descarca fisa tehnica pentru: JUMO 202924/20-0001-1003-613-83-31-31

Produsele recent vizualizate

Dold | Dold AI 838 DC4-8A RW48%

Articol Nr.: 0008848
Disponibilitate: 15-20 zile
Detalii produs: OVERCURRENT RELAY

Pepperl + Fuchs | V3-GM-BK5M-PUR-U

Articol Nr.: 217480
Disponibilitate: 2 sapt.
Detalii produs: Cablul feminin

Pulsotronic | Pulsotronic SJ6-Q12MB50-DPS

Articol Nr.:
Disponibilitate: 15 zile
Detalii produs: Inductive sensors DC XXL type Q12

Schneider | Schneider CSU36153002

Articol Nr.: CSU36153002
Disponibilitate: 10-15 zile
Detalii produs: T-piece, H = 60, W = 300, SENDZIMIRVERZINKT TYPE: TS- 60-300-S

Panasonic | SF2C-H24-N | Perdelă de siguranță tip 2 (PLc SIL1) pentru protecția mâinilor, înălțimea câmpului de protecție 480 mm, NPN, cablu tip 3m, IP67

Articol Nr.: SF2C-H24-N
Disponibilitate: 3-4 sapt.
Detalii produs: Perdelă de siguranță tip 2 (PLc SIL1) pentru protecția mâinilor, înălțimea câmpului de protecție 480 mm, NPN, cablu tip 3m, IP67

Pepperl + Fuchs | NBB2-8GM25-E3-V3

Articol Nr.: 304615-0032
Disponibilitate: 2 sapt.
Detalii produs: Senzor inductiv

Schneider | Schneider NSYAEDL2241S3D

Articol Nr.: NSYAEDL2241S3D
Disponibilitate: 10-15 zile
Detalii produs: S3D 2241A LOCK HANDLE

Schneider | Schneider LC2DT25FE7

Articol Nr.: LC2DT25FE7
Disponibilitate: 10-15 zile
Detalii produs: Reversing contactor combination, 4p, 25A / AC1, coil 115V 50 / 60Hz

Schneider | Schneider SH31002P01F2000

Articol Nr.: SH31002P01F2000
Disponibilitate: 10-15 zile
Detalii produs: Servo motor SH3 100 5.8Nm, no key, single, brake, 90 ° connection IP54 / IP65.6k RPM