Aflati pretul pentru JUMO 701170/8-0153-1001-23/005

JUMO 00547738

The freely programmable temperature limiter device according to DIN EN 14597 in the format 48 x 96 mm is designed for a voltage supply range from AC 110 to 240 V, 48 to 63 Hz, 5 VA. The measuring input is freely configurable for resistance thermometers, thermocouples as well as current and voltage signals. The existing analog output provides a standard or standard signal. Temperature limiters and monitors monitor thermal processes in systems for a set limit. If this is exceeded, the built-in relay (with fuse) switches the system into a safe operating state. The green OK LED goes out and the K1 LED lights up red. If the system comes back into the good range, the reset button must be pressed during temperature limiter operation. When configured as a temperature monitor, it automatically resets itself without any external influence. The relay KV can output a pre-alarm signal at an adjustable temperature before the limit value is reached, the switching status of which is also indicated by the LED KV. The device is designed for panel mounting and is connected via plug-in screw terminals with a cable cross-section of max. 2.5mm² wired.