Aflati pretul pentru JUMO 202924/31-0001-1005-997-83-31-31

JUMO 00562984

This conductive conductivity sensor has a cell constant of K = 0.01 (for measuring ranges 0.05 to 10 uS / cm or 0.1 to 20 MOhm / cm) as well as a Pt1000 measuring insert in a two-wire circuit. It is installed using the PEKA process connection adapter made of stainless steel (1.4435) with EHEDG certification. An M12 connector is available for the electrical connection. The material of the electrode is stainless steel (1.4435). The installation length is 70 mm. The operating temperature is 0 to +135 ° C in normal operation and up to +150 ° C for max. 45 min. with sterilization. The maximum pressure load is 9 bar at 25 ° C and 15 bar at 150 ° C (max. 45 min.). This version is a so-called pharmaceutical version with an acceptance test certificate according to EN 10204 3.1 for material and roughness, roughness of the parts in contact with the medium less than 0.8 my, with ASTM certificate and sealed in foil. ATTENTION: These measuring cells can only be used with an optional PEKA adapter.