Aflati pretul pentru JUMO 602021/0001-025-000-25-2000-40-1

JUMO 60000219

Thanks to its galvanized sheet steel housing, the 1-pole mechanical built-in thermostat is very robust and can also be used under harsh conditions. The measuring system used works on the principle of liquid expansion and can be used up to a maximum permissible sensor temperature of 125 ° C without any problems. The smooth round copper sensor has a diameter of 6 mm and a sensor length of approx. 157 mm. The long-distance cable of the thermostat is also made of copper and can be flexibly installed taking into account a bending radius of 5 mm. The maximum permissible ambient temperature at the switch head (protection class IP00) is 80 ° C. The switch head is fixed with the help of a mounting bridge using two M3 x 22 screws. With the help of a setpoint adjuster, which is available as an accessory, the desired switch-off temperature can be easily set on a scale. The temperature controller is characterized by a high switching point accuracy of +/- 1.5% in the upper third of the scale. A decisive advantage is that no additional auxiliary energy is required for temperature measurement. The electrical connection is made to the flat plugs (A 6.3 x 0.8 DIN 46244) of the switch set, which can switch a maximum permissible switching capacity of 230 V AC / 16 A directly. The thermostat has a switching difference (hysteresis) of 2.5% of the scale range and automatically switches back to its original state after this value has been fallen below the switch-off temperature. The temperature controller can be used very flexibly and is used in heating, air conditioning and ventilation technology as well as in the plastics industry, apparatus and furnace construction and for temperature monitoring in laboratories and climatic cabinets. The device is approved according to DIN EN 14597 and has UL and EAC approval.