Aflati pretul pentru JUMO 602025/0002-093-2000-10-8/707,

JUMO 60003016

Thanks to its galvanized sheet steel housing, the 1-pole mechanical built-in thermostat is very robust and can also be used under harsh conditions. The measuring system used works on the gas expansion principle and can be used up to a maximum permissible sensor temperature of 750 ° C. The smooth round sensor made of high-quality stainless steel has a diameter of 8 mm with a sensor length of approx. 115 mm. The long-distance line of the thermostat is also made of stainless steel and can be flexibly installed taking into account a bending radius of 5 mm. The maximum permissible ambient temperature at the switch head (protection class IP00) is 100 ° C. The temperature compensation reduces the ambient temperature influence on the switch head to a minimum. The switch head is fastened with the help of a mounting bridge using two M3 x 22 screws. The desired switch-off temperature can be easily set on a scale using a screwdriver. The temperature monitor is characterized by a high switching point accuracy of + 0 / -18 K in the upper third of the scale. A decisive advantage is that no additional auxiliary energy is required for temperature measurement. The electrical connection is made to the flat plugs (A 6.3 x 0.8 DIN 46244) of the switch set, which can switch a maximum permissible switching capacity of 230 V AC / 16 A directly. The thermostat has a switching difference (hysteresis) of 50 to 80 K and automatically switches back to its original state by falling below the switch-off temperature. The temperature monitor can be used very flexibly and is used in heating, air conditioning and ventilation technology as well as in the plastics industry, apparatus and furnace construction, as well as for temperature monitoring in the laboratory and climatic cabinets. The device has an EAC approval.