Aflati pretul pentru JUMO 603070/0001-5-026-000-25-2000-40

JUMO 60003186

Thanks to its impact-resistant housing made of high-quality plastic, the 1-pole mechanical body thermostat with changeover contact is very robust and can also be used under harsh conditions. The measuring system used works on the principle of liquid expansion and can be used up to a maximum permissible sensor temperature of 135 ° C without any problems. The smooth round copper sensor has a diameter of 6 mm and a sensor length of approx. 87 mm. The thermostat's long-distance line is also made of copper and rolled up inside the housing when it is delivered. Considering a bending radius of 5 mm, the long-distance line can be led out of the housing as required and laid flexibly. The protective sleeve made of brass, nickel-plated, included in the scope of delivery, has a diameter of 8 mm and can be mounted with a G 1/2 thread A according to DIN 3852/2. The maximum permissible ambient temperature on the housing (protection class IP54) is 80 ° C. The housing is attached directly to the lower part of the housing as a wall mount. With the help of a setpoint adjuster, the desired switch-off temperature can be easily set on a scale. The temperature controller is characterized by a high switching point accuracy of +/- 3% in the upper third of the scale. The built-in temperature compensation reduces ambient temperature influences on the switch head to a minimum. A decisive advantage is that no additional auxiliary energy is required for temperature measurement. The electrical connection is made using PushIn © terminals, which significantly reduces installation time compared to conventional screw connections. The maximum permissible switching capacity is AC 230 volts / 16 A. The thermostat has a switching difference (hysteresis) of approx. 3 K and automatically switches back to its original state when the switch-off temperature falls below this value. The temperature controller can be used very flexibly and is used both in building automation and in heating, air conditioning and ventilation technology. Other areas of application include the plastics industry, apparatus and machine construction, furnace construction and temperature monitoring in the laboratory and climatic chambers. The device is approved according to DIN EN 14597 and has an EAC approval.