Aflati pretul pentru JUMO 604170/02-5-008-2000-40/000

JUMO 60003410

Thanks to its impact-resistant housing made of high-quality plastic, the 1-pole mechanical body thermostat with relay output signal is very robust and can also be used under harsh conditions. The measuring system used can be used up to a maximum permissible sensor temperature of 110 ° C without any problems. The sensor line of the thermostat is made of copper. Taking into account a bending radius of 20 mm, the cable can be laid flexibly as required. The maximum permissible ambient temperature on the housing is 55 ° C. In order for the device to work properly, the ambient temperature on the housing must be above the set switching point. The housing is attached directly to the lower part of the housing as a wall mount. The desired switch-off temperature is set by buttons and shown in two digits on a 7-segment display. The thermostat is characterized by a high switching point accuracy of +/- 1 K. The device has a potential-free relay output, which is designed as a changeover contact. The minimum switching capacity is AC / DC 12 V, 100 mA, the maximum switching capacity is AC 230 V, 6 (2) A or DC 24 V, 6 A. Furthermore, the device has analog outputs with a permissible cable length of 300 m 1.5 mm² a current of max. Have 1 mA at DC 0 to 10 V. The analog input has a permissible current of max. 1 mA, DC 0 to 10 V. The voltage supply is AC 24 V. The frost monitor can be used very flexibly and is used both in building automation and in heating, air conditioning and ventilation technology.